Filters

Filters
Residual dust is significantly minimized using suitable filtering devices (less than 20 mg / standard cubic meter). Depending on the application, you can select between an integral filter and a reverse air filter. The two types have a specially robust design and transport separated dust back to the loaded material. Access for servicing the filter inserts is easy to reach and the filter control is adjustable as required.

Reverse Air Filter Type DF 9/2000

Reverse Air Filter Type DF 9/2000
9, 14, 18, 24, or 30 m2 filter area (custom sizes up to 56 m2)

Special Features
  • Large-size transition between loading mechanism and filter
  • Return of separated dust to loaded material
  • Guaranteed residual dust content less than 10 mg/standard cubic meter
  • Optimized maintenance through removable top section
  • Robust and solid craftsmanship
  • Filter housing made of stainless steel, glass-bead blasted; filter hood made of laminated FGR plastic, painted
  • Maintenance of filter inserts from clean gas side
  • Fitted blower
  • Filter control by timer relay

Optional

  • Differential pressure control

Adjusting the dedusting rate generally takes place to prevent any surface from being flatter than 60 degrees. This permits the optimized return of separated dust.


[download PDF]